Archer Plus R12+ 2.4Ghz receiver

The Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series.

The Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to existing anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power & Signal related) can be well preserved.

The R12+ receivers have 12 configurable channel ports*, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. The R12+ can be used as a Primary receiver in a redundant solution by setting a port (Channel Port1)as SBUS In and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.

The R12+ also provides a socket that can be used to connect the switch panel to enable the built-in Power Switch function, and it uses a set of standard XT30 plugs which also provides a safe and efficient way to provide power. By utilizing together with current overload wires on the channel ports, the connected device can be safeguarded.

Features:

• Enhanced Anti RF-Interference capability with more solid RF performance
• Smart-matched ACCESS & ACCST D16 modes
• Basic Black-Box Data Record Function
• Built-in Power Switch Function | Match with Different External Switches (Optional)
• 12 configurable channel ports* (PWM, SBUS, FBUS, or S.Port) (Note: In ACCST mode, SBUS Out is assigned on Pin11 & S.Port is on Pin12.)
• Supports signal redundancy (SBUS In)
• Full control range with telemetry (S.Port or FBUS)
• Anti-interference capability in the spark-ignition process
• Over-The-Air (OTA) FW update*
• External battery/device voltage detection

(*Some features require the support of ACCESS and ETHOS.)

Specifications:

• Dimension: 48.5*33*17.9mm (L*W*H)
• Weight: 21.3g
• Operating Voltage Range: 3.5 -12V (Recommend 2S Li-Batteries)
• Operating Current: <105mA@5V
• Continuous Current: =20A (power the device) | Instaneous Current: =40A (power the device)
• Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)
• Antenna connector: IPEX1
• Dual XT30 Power Input Connector
• Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters
• 12 Configurable Channel Ports (ACCESS mode): CP1: PWM / SBUS Out / FBUS / S.Port / SBUS In | CP2-12: PWM / SBUS Out / FBUS / S.Port
• SBUS Out (Supports 16CH / 24CH mode)

Does the receiver match your remote control, or which receiver can you use for remote control?

Overview receiver/transmitter

General download information:

Whether ETHOS manual, ETHOS suite, etc., here you will find a list of common downloads that are required or advantageous for the operation of FrSky components.

General download information

Manufacturer compliant with GPSR (EU)2023/988:

FrSky Electronic Co., Ltd F3, Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China China www.frsky-rc.com

Distributor / EU responsible person:

Engel Modellbau & Technik Inh. Andreas Engel Eberhäuser Weg 24 37139 Adelebsen - Güntersen Phone: 05502-3142 Germany www.engelmt.de