Horus X10 Express
Horus X10 Express use the ACCESS communication protocol, it boasts 24 channels with a faster baud rate and lower latency equipped with a high-speed module digital interface. Along with the new spectrum analysis function and added FrOS/OpenTX firmware, it is now possible to check the airwaves for RF noise.
The X10 Express support balancing charge for 2S Li-ion battery via a collateral USB cable. The accessible battery compartment design is another change worth mentioning, with two 18650 Li-ion batteries you can expect to be able to fly all day. The Express carries forward all of their predecessor’ features like the industrial LCD color screen, and the highly-accuracy M10 hall sensor gimbals which offer the most precise control. Additionally, it features a remarkable PARA wireless trainer function which also makes them compatible with the FrSky Free Link App and AirLink S. All that makes the Express version an ideal transmitter for, gliders, helis, multirotor and every type of fixed-wing imaginable.
- High-speed module digital interface with installed ACCESS protocol
- Supports spectrum analyzer function
- Supports wired training function
- New PARA wireless training system
- High-speed training system with a lower latency
- Compatible with FrSky Free Link App and AirLink S via mobile devices
- 2 internal antennas and detachable external antenna
- Antenna detection and accurate SWR warning
- Industrial LCD: 480*272 readable outdoor color screen
- Supports 2S Li-battery balancing charge with micro USB interface
- Easily accessible battery compartment
- M10 hall sensor gimbals and extendable stick ends
- Dimension: 213*225*112mm (L*W*H)
- Weight: 950g (without battery)
- Operating system: Delivery with ETHOS / operation with OpenTX possible
- Internal RF module: ISRM-S-X10
- Number of Channels: 24 channels
- Operating Voltage Range: 6.5 ~ 8.4V (2S Li-battery)
- Operating Temperature: -10?- 60 ? (14? -140? )
- Operating Current: 240mA@7.4V (typ)
- Charging Current: =1A ±200mA
- USB Adaptor Voltage: 5.0+0.2V
- USB Adaptor Current: >2.0A
- Backlit LCD resolution: 480*272
- Compatibility: ACCST D16 and ACCESS receivers
- ACCESS (24 channel full Duplex Telemetry)
- ACCST D16 (16 channel full Duplex Telemetry)
A bus system developed by FrSky for the control of various terminal devices using the "full duplex" method via one line. The SmartPort connector installed in the transmitter's battery compartment enables very simple and secure updates of SmartPort terminals via the transmitter.
- HORUS X10 with Li-Ion battery pack (Mode 2)(Design: Silver)
- USB data and charging cable
- Neck strap
- Ready flashed Micro SD card (only from Engel Modellbau)
- Soft Case
- Short Instruction
- German Manual
The Archer R8 PRO has 8 high-precision PWM channel outputs and features excellent Anti-interference performance when it comes to spark-ignition on internal combustion models. It supports full-range signal strength with dual detachable antennas that assure optimal antenna reception and maximum range. In addition to all this, the R8 Pro can also be used as a redundancy receiver along with any other FrSky ACCESS capable receiver equipped with a SBUS port.
All of the Archer receivers are hyper-matched with the ACCESS protocol. They not only feature wireless firmware upgrades, increased range, and telemetry performance, the R8 PRO now supports more functions like configurable telemetry power, S.Port/F.Port switching and FLR output. Additional valuable features are under development to unlock the true potential of the ACCESS protocol.
- German manual
- ACCESS protocol with Over The Air (OTA)
- Anti-interference in spark-ignition
- Supports signal redundancy (SBUS In)
- Full control range with telemetry
- S.Port / F.Port
- External battery / device voltage detection
- Dimension: 47*26*15mm (L*W*H)
- Weight: 13g
- 16/24 Configurable SBUS Channels
- 8 High-precision PWM Channels
- Operating Voltage Range: 3.5 -10V
- Operating Current: 55mA@5V
- Control Range: Full range* with telemetry (*Full Range: >2km, range may vary based on local conditions.)
- Voltage Measurement Range via AIN2 (External device): 0-36V
- Compatibility: All FrSky ACCESS transmitters
- * Our offer is aimed at consumers. Therefore, all prices are inclusive of VAT. and plus shipping costs.
- Images may be similar. For product information, we can assume no liability. Shown accessories are not included. Logos, names and trademarks are the property of their respective owners. Changes, errors and prior sale.