ORACOLOR black

IMPORTANT NOTE

DISPATCH ONLY WITHIN EUROPE

ORACOLOR® is the new developed MATCHING paint system for all ORACOVER® and ORATEX® products. ORACOLOR® base coat is a highly concentrated 2-component paint. Depending on the intended application technique, ORACOLOR® can be either mixed with the HARDENER FOR SPRAYING or the HARDENER FOR BRUSHING. The mixing ratio is 2 parts base coat to 1 part hardener for spraying or hardener for brushing respectively. By adding the hardener you automatically achieve the correct consistency of the paint for spraying or brushing. Completely cured, ORACOLOR® is FUEL PROOF and CAN BE IRONED ON. Furthermore, we would like to inform you that our model aircraft paints are highly concentrated and that,depending on the spraying machine,they need to be diluted up to 40% with ORACOLOR® Special thinner to have the optimal consistency especially at lower or higher temperatures.

Contents: 100 ml

2-component paint

Mixing ratio in ml: 1:2 (hardener:paint)

Not suitable for surfaces not resistant to organic solvents.

IMPORTANT INFORMATION

For this 2-component paint you will need additionally to every tin of paint one original ORACOLOR® Hardener for brushing or spraying,

depending on how you would like to use the paint.

Furthermore, we would like to inform you that our model aircraft paints are highly concentrated

and that,depending on the spraying machine,

they need to be diluted up to 40% with ORACOLOR® Special thinner

to have the optimal consistency especially at lower or higher temperatures.

Distributor / EU responsible person:

Lanitz-Prena-Folien-Factory GmbH Am Ritterschlößchen 20 04179 Leipzig Phone: 0341-4423050 Germany www.Oracover.de